TECHNICAL DESCRIPTION
• The partition panel "FLEX" is composed of a flexible panel anchored to the wooden uprights.
• Each board requires two pillars at the ends.
The posts can be shared between two or more panels.
• The internal panel is flexible in the standard version of a sandwich obtained by laminating two sheets of medium density with an inner cotton cloth stabilized.
• The outer surface of the panel is finished with laminate thickness mm 3 / 10 in maple finish and aluminum
• The outer edges of the panel are recorded in order to obtain the vertical slats.
The incisions allow the sandwich panel to flex in order to obtain the concave and convex curves.
• The minimum radius of curvature of the panel depends on the thickness and width of the slats.
Panel thickness: 12 mm Width
stave vertical
14 mm radius of curvature: 50 mm
• panel size: mm 1200x1800h
• The uprights are 80mm aluminum, aluminum color.
• The posts can have 2 different types of steel base coated in aluminum color
similar RAL 9006:
- Ø350 mm circular
- "a duck" dim. mm. 360x250
• The junction between the wooden panel and the respective amount shall be made by means of specific two aluminum profiles.
0 comments:
Post a Comment