What Is Sata Data Cable

PANELS PANELS OF THE LINE DIVIDING LINE CLIPPER

TECHNICAL DESCRIPTION

CLIPPER • The panel consists of an assembly of the inner panel outer frame + both views. The total thickness of the panel is 20 mm CLIPPER
• Laminate Finish: The inner panel is made of chipboard sp.mm 12 (or polystyrene) coated on two sides with plastic laminate sp.mm 0.9 (standard colors: black medium ~ RAL7001, RAL7035 ~ pearl gray, sand ~ RAL1013), total thickness of 14 mm inner panel;
• Felt Finish: The inner panel is made of chipboard sp.mm 8 plated on 2 sides with plastic laminate and covered with felt Polypropylene (standard colors: gray cloud or beige), total thickness of 14 mm inner panel
• Transparency panel: The inner panel is made of an acrylic sheet sp.mm 3 (color Standard Smoked or Clear) inserted in a rugged metal frame 14 mm thick epoxy painted the same color as the outer frame;
• The aluminum frame is covered with a PVC jacket (light gray or gray RAL 7011 ~ Pearl ~ RAL 7035) and has a nylon corners which are also points of attachment, the total thickness of 20 mm frame
• Each panel is supplied in individual packaging and with all necessary accessories for mounting (adjustable feet, CLIP , CAP, SGANCIACLIP) and a clear instruction sheet. Special
system
• Engagement with other panels is achieved by snap CLIP plastic, you can hook up to four panels on the same axis;
• The panels can rotate 360 \u200b\u200b° hooked;
• The installation requires no special tools;
• The panels attached and angular position, with an angle of up to ~ 120 ° are self-supporting;
• The attachment points are not used can be trimmed with the CAP of the same color of the frame
• The removal of the panels is done using a simple SGANCIACLIP. Modular office

• For laminate finish and felt: cm 195x130, 195x65 cm, cm 130x130, 130x65
• To be transparent: 195x65 cm, 130x65 cm, 65x65 cm
Finishes: E ' can make different color panels with internal standards, you can choose from a wide palette of laminate that is felt.
Size: It 's possible to create panels of any size between cm.25x25 and cm.130x195 (cm.130x250 version in polystyrene foam);
Materials: The inner panel can also be realized by the combination of fire retardant materials in class 1 or with the use of materials other than those specified;
Accessories
PM01: Foot metal, is used to allow the placement of individual panels or creating rectilinear compositions;
SM01: Bracket to wall, used to hang a panel or a composition panels on a wall;
PI01: Upright, used to attach a panel or a combination of floor panels;
PI01R: Upright on wheels, used to create mobiles of panels (shown is the use of lightweight panels with internal polystyrene);