Diverticulitis Can You Have Corn?

PANELS PARTITIONS DIVIDING LINE MACRO

TECHNICAL DESCRIPTION

• The panel "Macro" is Cassette
connecting two or more specific means of connection joints can be achieved both removable walls that fixed walls.
can be hooked up to 4 panels on the same vertical axis.

• The panel is composed of:
a) by an aluminum
b) by a sheet of translucent polycarbonate 10 mm thick.

• The structure is made with a system of aluminum profiles section of 40x40 mm, powder coated polyester.
The structure consists of vertical and horizontal cross-joined internally with a special locking system.
The posts placed on the perimeter of the structure have grooves appropriate for inclusion in the terminals or accessories.

• Board dimensions:, 100x200h cm, cm 150x200h, 200x200h cm, cm 300x200h.

• Connecting joints
The couplings allow quick attachment of the panels. They are made of sheet steel, powder coated polyester. They are complemented by round head bolts with stainless steel and special threaded plates.
a) connecting joint linear
b) connecting joint angle (90 degrees)

• Stabilizers
The outriggers exploit the special grooving on the end of each panel. This coupling system allows:
a) fine adjustment in height
b) effective leveling of the panel is compared to its longitudinal axis, and compared to the transverse
c) that directly support the panel by adjusting the feet on the floor in the retracted position .

• The panel 'has 3 different types of outriggers:
- foot square made of sheet steel section 40x8h mm, 310 mm protruding from the surface of the panel. Powder coating poliestere.Due feet connected on the same panel form a solid base of 680 mm (including the thickness of the panel)
- square-foot short stainless sheet steel of sect. mm40x8h, protruding 70 mm from the surface of the panel.
suitable to be inserted in the corner points of a composition of panels. Polyester powder coating.

• All feet have a vertical adjustability of 125 mm
Where the feet are not sufficient to compensate for a table top with steep slopes or very irregular situations, you can place the panels in a pattern "jagged".

• Other accessories
hinge door panel
Wheel